Roll to Roll Led Strip
Art work
Roll to Roll Led Strip: The roll-to-roll process is adopted, and the roll-to-roll/long-board PCB (up to 100 meters in length) is selected on the flexible circuit board. This process makes the production of the lamp board more continuous and automated, improves the production efficiency, and reduces the error caused by human operation.
Regular Strip: Usually a chip to chip/board to board process is used, and a short board PCB (usually 0.5 m) is selected on the flexible circuit board. Compared with the roll-to-roll process, the production efficiency of the conventional soft lamp board may be lower, and the technical level of the operator has certain requirements.
Lighting Effect
Roll to Roll Led Strip: The long board design makes the splicing probability very low, resistant to distortion, and greatly reduces the probability of dead lights caused by poor splicing. At the same time, the continuous coating of fluorescent colloid has better luminous consistency, ensuring a uniform and soft luminous effect.
Regular soft Led Board: Due to the short plate design, the two plates need to be joined together at every 0.5 meters apart, and there is an obvious splicing solder joint. These splicing points may have a certain impact on the luminous effect, resulting in uneven luminous or spot phenomenon.
Material & Durability
Roll to Roll Led Strip: Due to the long board design, the splicing points are reduced, thus reducing the failure rate caused by poor splicing.
Regular Led Strip: Many splicing points, the failure rate is relatively high.
Design & Installation
Roll to Roll Led Strip: The design is flexible, easy to bend and cut, and can be customized according to needs. At the same time, the installation is simple, suitable for non-professional electrician operation.
Regular Led Strip: the design and installation may be more traditional, requiring professional electricians to operate. Due to the existence of splicing points, it is necessary to pay attention to the accuracy and firmness of splicing during installation.
Application scenario
Roll to Roll Led Strip: Due to its excellent luminous effect and durability, it is suitable for commercial shop decoration, hotel decoration, engineering decoration, home improvement and other fields, especially for some occasions where need uniform and soft lighting.